Installation Tools (9 products)

RJ45 Crimp Tool, for use with Easy RJ45 UTP & FTP Pass through Plugs

The 'Easy' RJ45 Crimp tool works perfectly with the 'Easy' Cat6 UTP & FTP Pass Through Plugs.With its added cutting function, this crimp tool trims off the excess wires as it crimps the RJ45 plug.- For use with RJ45 Pass through plugs- Can be used to cut outersheath of cable See below for the 4 step 'Easy' Instructions 1 Remove approximately 20mm of outer jacket using the multi-purpose crimp tool.2 Arrange wires into the correct colour code sequence (most commonly EIA/TIA 568B). Slot cable into the plug pushing the wires through. Outer... More Info

Simple tool used to remove PatchLock Leads from Sockets

This simple tool is compatible with the PatchLock RJ45 Patch Leads and used to remove the leads from RJ45 Sockets More Info

Universal Crimp Tool

This universal crimp tool works with RJ45 and RJ12 plugs. More Info

The Pocket Socket Tester is the ideal tool to check continutity and connectivity

The Connectix Pocket Socket Tester is a quick, easy to use tool to verify connectivity. Its unique snap-together design makes it easy to take on-site. The tester gives an instant indication of the connections present, because its four bi-colour LEDs indicate the status of the pairs in the cabling. A separate indicator also shows the shield connection for shielded systems. The circuitry has been specially designed to identify crossover patch cords. But the tester is equally suited to check a single patch cord or a complete channel. Features:... More Info

Simple tool for stripping the outer sheath of cables

The Connectix Cable Stripper is the ideal way of stripping data cables. Its fully encapsulated blades ensure a precisely controlled and constant cutting depth, without the risk of nicking individual wires or fingers. And with only one rotation of the stripper, it removes cable outer jackets of all common shielded and unshielded data cables up to a diameter of 8mm. In addition, it can also be used to strip the outer jacket of RG58 and RG59 size coaxial cables. Features: Controlled cutting depth Encapsulated blades for maximum safety Minimises... More Info

A simple toolkit for all your stuctured cabling installation needs

The Connectix Cabling Systems Installation Toolkit contains all the tools needed for installing data cabling in one convenient package. The kit contains a pozi-drive screwdriver for cage nuts and cabinet shelves, and a flat blade screwdriver for faceplate screws. It also includes a set of wire cutters, a punchdown tool, cable stripping tool and the Connectix Tester - an easy to use diagnostic tool to confirm connectivity of installed cabling. Features: Contains all the tools required for structured cabling termination Housed in a convenient... More Info

Flat Head Screwdriver

The Connectix Cabling system flat blade screwdriver is the perfect tool for using with faceplate screws More Info

Punchdown tool for terminating on Krone Style IDCs

Our Punch down tool is perfect when terminating the back of any Connectix Cabling System RJ45 Patch Panels or Module. More Info

125mm Side cutters

The Connectix Cabling system wire cutters are the ideal tool to be kept by your side when installing a cabling system. More Info