Fibre Networking (368 products)

1000BASE-LX SFP 1310nm SMF 10km LC. Fully compatible with Brocade/Ruckus...

Compatible with Brocade/Ruckus E1MG-LX-OM Form Type: SFP Data Rate: 1000BASE 1.25Gbps Wavelength: 1310nm Distance: 10km Connector: Dual LC Fiber Type: SMF Operating Temperature: 0~70 C DOM Supported: Yes More Info

Available in 100m & 305m boxes.

Connectix Enhanced Category 5 UTP Cable is designed for high speed LANs including Gigabit Ethernet applications.The Cca LSZH sheath offers excellent fire performance making this the ideal choice in public buildings and other high risk locations, exceeding the requirements of BS6701:2016+A1:2017 for installation cables.When used with Connectix Enhanced Category 5 panels and modules it gives the exceptional performance required for transmission over all four pairs.Features & BenefitsSuitable for Gigabit Ethernet applications Supplied... More Info

Fibre Patch lead terminated with LC connectors at one end and ST at the...

Our singlemode fibre patch leads are manufactured in-house, are 100% tested and certified and surpass the high standards required for datacomms and CATV applications. The leads are manufactured in our advanced fibre termination facility under stringently controlled quality conditions. Our termination facility is one of the largest in the UK providing a high volume and fast turnaround service for any length singlemode lead. If you require a length that is not shown, email in and we can send over a quote. LC-ST Fibre Lead Details Features:... More Info

Singlemode Fibre Pigtails available with SC/PC & SC/APC connectors.

Fibre optic pigtails are typically used to link the fibre optic cable with fibre optic equipment. The connector side of the pigtail is used to link the equipment, while the other side is fusion spliced together with the fibre cable. By splicing together the fibre glasses, it can reach a minimum insertion loss. We are committed to holding extensive stock of many assembly types in all common lengths. This allows us to provide a same day despatch service on most small or medium volume orders. Features:Individually bagged with individual test... More Info

1000BASE-T SFP RJ45 100m Cu. Fully compatible with Cisco SMB MGBT1

Compatible with Cisco SMB MGBT1Form Type: SFPData Rate: 1000BASEWavelength: N/ADistance: 100mConnector: RJ45Fiber Type: Copper Cat5Operating Temperature: 0~70 CDOM Supported: No More Info

For use with Singlemode/Multimode Power meter

Universal 2.5mm ferrule to 1.25mm adaptor Compatible to SC/ST/FC/LC/MU connectors More Info

10/100/1000BASE-T SFP RJ45 100m Cu. Fully compatible with Ubiquiti UF-RJ45-1G

Compatible with Ubiquiti UF-RJ45-1GForm Type: SFPData Rate: 100/1000BASEWavelength: N/ADistance: 100mConnector: RJ45Fiber Type: Copper Cat5Operating Temperature: 0~70 CDOM Supported: No More Info

10GBASE-SR SFP+ 850nm MMF 300m LC. Fully compatible with Cisco Systems...

Compatible with Cisco Systems SFP-10G-SRForm Type: SFP+Data Rate: 10G 10.3125GbpsWavelength: 850nmDistance: 300mConnector: Dual LCFiber Type: MMFOperating Temperature: 0~70 CDOM Supported: Yes More Info

XP Fit Plus SC Field Installable Connector

The XP Fit Plus is a pre-polished, pre-assembled connector compatible with the standard SC connector. In place of epoxy, an internal mechanical grip gently but effectively holds the fibre in place and can be installed in under two minutes. Without polishing or adhesives,the XP Fit Plus makes field installations quick and easy, eliminating the need for epoxy curing and hand polishing at the work site. Please Note: The connectors no longer come with the 'Jig', if required, this needs to be purchased separately. Features:Epoxy-free crimp... More Info

XP Fit Plus LC Field Installable Connector

The XP Fit Plus is a pre-polished, pre-assembled connector compatible with the standard LC connector. In place of epoxy, an internal mechanical grip gently but effectively holds the fibre in place and can be installed in under two minutes. Without polishing or adhesives, the XP Fit Plus makes field installations quick and easy, eliminating the need for epoxy curing and hand polishing at the work site.  Please Note: The connectors no longer come with the 'Jig', if required, this needs to be purchased separately.   Features: Epoxy-free crimp... More Info