Fibre Networking (387 products)

Xp-Fit Field Termination Kit XPF-P-F

No epoxy, polishing film, or other consumables are required, and there is no need for electrical power, allowing installers to get in and out of installation sites quickly Features:Fast installation to minimize osite labour costs Easy operation Quick assembly in under 2 minutes No adhesive or polishing required Compact tool without electrical powerKit Includes:Inner Cable Jacket Stripper  Thermal Buffer Removal Tool Replacement Blade Set Premium Cleave Tool (Flat) Lint Free Dry Wipes Fiber Optic Cleaning Pen Kevlar Scissors Fibre... More Info

This visual fault locator gives a continuous or pulse of red light.

Refraction of the 650nm red light caused by any breaks and or cracks in the fiber will glow red, thus giving an exact visual location of the fault in the fiber. Features: 2.5mm Adapter built into unit(ST, SC, FC connector) 1.25mm adapter availabe to purchase seperatly (this adapter is shown in picture) Robust and handy design Dust-free cup to protect LD Continuous/Pulse mode options  Emitting LD 650 nm visible red light Low voltage battery warning signal in led More Info

Fast Evaporating pre-Moistened swabs, individually wrapped

Sold in Pack of 100 individually small wrapped Fast Evaporating Single Use Pre-Moistened swabs Ideal for removing dirt, dust and oil Approximate size - Folded 30mm x 30mm, unfolded 30mm x 60mm Absorbant fibre-free swabs, contains 70% (IPA) Alcohol Small in size, these are not large handwipes More Info

10/100/1000BASE-T SFP RJ45 100m Cu. Fully compatible with Cisco Viptela...

Compatible with Cisco Viptela VIP-SFP-1GE-BASETForm Type: SFPData Rate: 100/1000BASEWavelength: N/ADistance: 100mConnector: RJ45Fiber Type: Copper Cat5Operating Temperature: 0~70 CDOM Supported: No More Info

LC Fibre Connector, available different fibre sizesSX= Simplex DX =Duplex

The LC connectors and adaptors set the standard for small optical fibre interconnects. With its simple to use latched lever locking mechanism preventing accidental disconnection and precision housing for optimum performance. The LC is a Small Form Factor (SFF) connector available for high density population and performance. The LC connector uses a 1.25mm ferrule, half the size of the ST. Otherwise, it is a standard ceramic ferrule connector and its good performance makes it highly favoured for singlemode terminations. LC connectors are... More Info

LC Fibre Adapter/Coupler Available in Multimode and Singlemode options....

The LC connectors and adaptors set the standard for small optical fibre interconnects. With its simple to use latched lever locking mechanism preventing accidental disconnection and precision housing for optimum performance. The LC is a Small Form Factor (SFF) connector available for high density population and performance. PLEASE NOTE THE PHOTO IS OF THE LC DUPLEX ADAPTER. More Info

Bulkhead adapter available in Multimode and Singlemode options

The ST adaptor set the standard for optical fibre interconnects. With its simple to use bayonet locking mechanism, it preventing accidental disconnection. With the precision housing this adaptor gives the very best performance. Generally there are two types of alignment sleeve within an adaptor; phosphor bronze for multimode or zirconia (ceramic) for singlemode. More Info

10GBASE-SR SFP+ 850nm MMF 300m LC. Fully compatible with Arista SFP-10G-SR-AR

Compatible with Arista SFP-10G-SR-ARForm Type: SFP+Data Rate: 10G 10.3125GbpsWavelength: 850nmDistance: 300mConnector: Dual LCFiber Type: MMFOperating Temperature: 0~70 CDOM Supported: Yes More Info

Singlemode FC Connector 1.8mm

The FC Connector is used extensively in the telecommunications market, where long singlemode optical fibre cables can run upwards of 50km. In these extreme situations the connector needs to have extremely low loss and accurate geometry. The FC Optical Fibre Connector comprises of a nickel plated brass body and a ceramic ferrule/spring/crimp barrel assembly plus a crimp over sleeve and rubber boot. The connector is precision made and manufactured to demanding specifications. The combination of a ceramic ferrule and a precision nickel plated... More Info

FC Adapter for use with Singlemode FC connectors

The FC connector and adaptor set are mainly used for singlemode applications where precision is required. With its simple to use locking threadmechanism preventing accidental disconnection, this provides a very secure connection. More Info