Active Equipment (2709 products)

100GBASE-SR4 QSFP28 850nm MMF 100m MTP. Fully compatible with Juniper...

Compatible with Juniper JNP-QSFP-100G-SR4Form Type: QSFP28Data Rate: 100G 103.1GbpsWavelength: 850nmDistance: 100mConnector: MPOFiber Type: MMFOperating Temperature: 0~70 CDOM Supported: Yes More Info

1.2 Ghz, GaN, 296.1 x 243.3 x 172mm

The Cisco® 1.2GHz GainMaker® GaN System Amplifier is the latest-generation broadband amplifier in the Cisco GainMaker platform. Gallium nitride (GaN) technology supports RF output levels up to 57 dBmV. The Cisco GaN amplifier (Figure 1) provides one high-level forward RF output. All Cisco GainMaker products share common plug-in accessories and perform to 1.2 GHz in the forward path.Cisco 1.2GHz GainMaker system amplifier modules have increased gain to allow drop-in for 750-MHz spacing and are mechanically compatible with previous Cisco... More Info

100GBASE-LR4 QSFP28 1310nm SMF 10km LC. Fully compatible with Juniper...

Compatible with Juniper JNP-QSFP-100G-LR4 More Info

Ellipse ECO 1600 USB IEC

The Eaton Ellipse ECO is a slim-line power protection with built-in high performance surge-protection device (compliant with IEC 61643-1 standard). With an efficient electrical design and the EcoControl function (USB models) the Eaton Ellipse ECO helps you make energy savings of up to 25 per cent compared to previous-generation UPSs. More Info

Powerline 500 AV Wireless Access Point, 300 m, 2 x 10/100 Mbps

- Create or expand a wireless network with this Powerline adapter- 500 Mbps Powerline and 300 Mbps Wireless N- Easy no-CD installation- Two convenient Ethernet ports- Two Powerline devices are required to start a networkTRENDnet’s Powerline 500 AV Wireless Access Point, model TPL-410AP, uses an electrical outlet to create or expand a wireless network. Two Powerline adapters are needed to start a network. Connect one adapter to a router and plug in the TPL-410AP on your electrical system to create or expand a high performance wireless network. More Info

APC Smart-UPS X 3000VA Rack/Tower LCD 200-240V

Please Note, this product is not for consumer use in the European Union.Boost and Trim Automatic Voltage Regulation (AVR)Gives higher application availability by correcting low and high voltage conditions without using the battery.Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.Temperature-compensated battery chargingProlongs battery life by regulating the charge... More Info

RJ45 x 2, USB Type C, 802.11a/b/g/n/ac/ac-wave2

Build your Wi-Fi network with the UniFi® AC HD Access Point, part of the Ubiquiti Networks® UniFi Enterprise Wi-Fi System. The UAP-AC-HD, is an indoor/outdoor, high-performance, 802.11AC Wave 2 dual-band access point, capable of throughput speeds of up to 2533 Mbps and a maximum range of up to 122 meters. Engineered from the ground up to take advantage of 802.11AC Wave 2, the UAP-AC-HD provides unparalleled multi-user support. More Info

SFP+, 16Gbit/sec, MM, 850nm, LC, 1 Pack

High Reliability and Optimized PerformanceBrocade transceiver modules undergo rigorous testing and are optimized for Brocade 8Gb products to maximize performance, reduce power consumption, and help ensure the highest availability of mission-critical applications. More Info

1000BASE-SX SFP 850nm MMF 550m LC. Fully compatible with Cisco SMB MGBSX1

Compatible with Cisco SMB MGBSX1 Form Type: SFP Data Rate: 1000BASE 1.25Gbps Wavelength: 850nm Distance: 550m Connector: Dual LC Fiber Type: MMF Operating Temperature: 0~70 C DOM Supported: Yes More Info

1000BASE-LX SFP 1310nm SMF 10km LC. Fully compatible with Cisco SMB MGBLX1

Compatible with Cisco SMB MGBLX1 Form Type: SFP Data Rate: 1000BASE 1.25Gbps Wavelength: 1310nm Distance: 10km Connector: Dual LC Fiber Type: SMF Operating Temperature: 0~70 C DOM Supported: Yes More Info