Product successfully added to your shopping cart
Quantity
Total
There is 1 item in your cart.
Total products
Total shipping
Total
- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.
- Adopts WDM technology, transmitting and receiving data on one single fiber.
The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC112CS supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data and at 1310nm on receiving data. Another TP-LINK’s media converter MC111CS is just one of the examples to cooperate with MC112CS.
Other features of this module include the ability to be used as a stand alone device (no chassis required), Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC112CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.
- Adopts WDM technology, transmitting and receiving data on one single fiber.
The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC112CS supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data and at 1310nm on receiving data. Another TP-LINK’s media converter MC111CS is just one of the examples to cooperate with MC112CS.
Other features of this module include the ability to be used as a stand alone device (no chassis required), Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC112CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.
| Cabling technology | UTP 3, 4, 5e, 5 |
| Certification | FCC, CE |
| Compliance industry standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
| Connectivity technology | Wired |
| Dimensions (WxDxH) | 94.5 x 73 x 27 mm |
| Full duplex | Yes |
| I/O ports | 1x 100M SC 1x 100M RJ45 |
| LED indicators | PWR, FDX/Col, Link/Act, SPD |
| Maximum transfer distance | 20000 m |
| Operating relative humidity (H-H) | 10 - 90 % |
| Operating relative humidity range | 10 - 90 % |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating temperature range (T-T) | 0 - 40 °C |
| Source data-sheet | Icecat.biz |
| Storage relative humidity (H-H) | 5 - 90 % |
| Storage relative humidity range | 5 - 90 % |
| Storage temperature (T-T) | -40 - 70 °C |
| Storage temperature range (T-T) | -40 - 70 °C |
You might also like
-
Netgear GS105
-
LC - LC Multimode Duplex Fibre Patch Leads
-
ST Loaded Break Out Box
-
TP-LINK 10/100Mbps Single-mode Media...
-
Armoured Pre-Terminated Fibre Cable
-
SC - ST Singlemode (9/125) Duplex Fibre...
-
TP-LINK MC100CM
-
Pre-Terminated Fibre Cable
-
ST - ST Bulkhead Adaptor
-
SC - SC Multimode Duplex Fibre Patch Leads
Similar products
-
TP-LINK MC100CM
-
TP-LINK 10/100Mbps Single-mode Media...
-
TP-LINK 10/100Mbps WDM Media Converter
-
TP-LINK Gigabit Multi-mode Media Converter
TP-LINK 10/100Mbps WDM
MC112CS 1x 100M SC, 1x 100M RJ45, IEEE 802.3, IEEE 802.3u, IEEE 802.3x
MC112CS
Out of Stock
£32.15
£26.79 Ex VAT. 
